LinuxGuruz
  • Last 5 Forum Topics
    Replies
    Views
    Last post


The Web Only This Site
  • BOOKMARK

  • ADD TO FAVORITES

  • REFERENCES


  • MARC

    Mailing list ARChives
    - Search by -
     Subjects
     Authors
     Bodies





    FOLDOC

    Computing Dictionary




  • Text Link Ads






  • LINUX man pages
  • Linux Man Page Viewer


    The following form allows you to view linux man pages.

    Command:

    upsstats.html

    
    
    

    DESCRIPTION

           This file is used by upsstats.cgi(8) to generate status pages. Certain
           commands are recognized, and will be replaced with various status
           elements on the fly.
    
    
    

    FORMATTING

           Commands can be placed anywhere on a line, but must start and end with
           @. Any extra characters before or after the commands will be passed
           through unchanged. It is allowed to use more than one command on a
           single line, as long as each command has its own start and end
           character. If you need to use the @ sign, use @ to prevent it from
           being treated as a start character.
    
    
    

    BLOCK CONTROL

           Some commands begin blocks - sections of the template that will be
           included, excluded, or repeated depending on certain parameters.
    
       BLOCK CONTROL - ITERATION
           @FOREACHUPS@
               Starts a block that will be repeated for each MONITOR directive in
               the hosts.conf(5). This is how you can generate pages that monitor
               all of your systems simultaneously.
    
           @ENDFOR@
               Ends a FOREACHUPS block.
    
       BLOCK CONTROL - MATCHING SPECIFIC CASES
           @IFSUPP var@*
               Starts a block that will only be printed if the variable var is
               supported by the current UPS. This is generally used to suppress
               "not supported" messages by avoiding the label and variable call
               entirely.
    
           @IFEQ var value@
               Starts a block if the value returned from the variable var matches
               value.
    
           @IFBETWEEN varlow varhigh varvalue@
               Starts a block if the value returned by the variable varvalue is
               between the values returned by the variables varlow and varhigh.
    
           @ELSE@
               If the previous IF-command did not match, perform this instead.
    
           @ENDIF@
               Ends an IF/ELSE-block.
    
       BLOCK CONTROL - ADVANCED EXPRESSIONS
           Even though the parser is pretty limited, it's still possible to create
           rather advanced expressions. The key to this is the fact that multiple
           block control commands are AND:ed. This is illustrated with an example
           (more examples are available in upsstats.html).
    
    
    

    OTHER COMMANDS

           @AMBTEMP@
               Insert the ambient temperature in the current temperature scale.
    
           @DATE format@
               Insert the current date and time. The format string is passed to
               strftime, so almost anything is possible. See strftime(3) for
               possible values.
    
           @DEGREES@
               Insert the entity for degrees (?) and either C or F depending on
               the current temperature scale.
    
           @HOST@
               Insert the designation of the host being monitored, like
               myups@localhost.
    
           @HOSTDESC@
               Insert the hout's description from hosts.conf(5).
    
           @HOSTLINK@
               Insert a link to upsstats.cgi with the "host" variable set to the
               current UPS. This is only useful within a FOREACHUPS block.
    
           @IMG varname @
               Insert an IMG SRC to upsimage.cgi(8) for one of these status
               variables:
    
               battery.charge
                   Battery charge - a percentage
    
               battery.voltage
                   The charge on the battery in volts
    
               input.frequency
                   Incoming utility frequency (Hz)
    
               input.voltage
                   Incoming utility voltage
    
               input.L1-L2.voltage
                   Incoming voltage, L1-L2 (3phase)
    
               input.L2-L3.voltage
                   Incoming voltage, L2-L3 (3phase)
    
               input.L3-L1.voltage
                   Incoming voltage, L3-L1 (3phase)
    
               output.frequency
                   Outgoing utility frequency (Hz)
    
    
               output.L2.power.percent
                   UPS load, L2 (3phase)
    
               output.L3.power.percent
                   UPS load, L3 (3phase)
    
               ups.load
                   UPS load - percentage
    
               ups.temperature
                   UPS temperature
    
           extra is where you can put additional definitions. Right now the valid
           definitions are colors for various parts of the bars drawn by
           upsimage.cgi. Possible color names are:
    
           back_col
               background color
    
           scale_num_col
               scale number color
    
           summary_col
               summary color (number at the bottom)
    
           ok_zone_maj_col
               major scale color for the normal ("ok") zone
    
           ok_zone_min_col
               minor scale color for the normal ("ok") zone
    
           neutral_zone_maj_col
               major scale color for the neutral zone
    
           neutral_zone_min_col
               minor scale color for the neutral zone
    
           warn_zone_maj_col
               major scale color for the warning zone
    
           warn_zone_min_col
               minor scale color for the warning zone
    
           bar_col
               the color of the bar in the middle
    
           All colors are hex triplets - 0xff0000 is red, 0x00ff00 is green, and
           0x0000ff is blue.
    
           Examples:
    
               Insert red, green, or yellow color triplets depending on the
               severity of the current UPS status. Normal operations are green,
               warnings like voltage trim/boost or "off" are yellow, and other
               events like being on battery or having a low battery are red.
    
           @VAR varname@
               Insert the current value of the status variable varname on the host
               being monitored, or "Not supported".
    
           @RUNTIME@
               Inserts the current runtime, in hh:mm:ss format.
    
           @TEMPC@
               Use the Celsius scale for temperature data (default).
    
           @TEMPF@
               Use the Fahrenheit scale for temperature data.
    
           @UPSTEMP@
               Insert the UPS temperature in the current scale.
    
           @BATTTEMP@
               Insert the battery temperature in the current scale.
    
           @UTILITYCOLOR@
               Obsoleted. Use IFBETWEEN instead (see example in upsstats.html).
    
           @VERSION@
               Insert the version number of the software.
    
    
    

    OTHER TEMPLATES

           upsstats.cgi(8) will also open a file called upsstats-single.html if
           you call it with "host=" set in the URL. That file uses the same rules
           and techniques documented here.
    
    
    

    SEE ALSO

           upsstats.cgi(8), upsimage.cgi(8)
    
       Internet resources:
           The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
    
    
    

    Network UPS Tools 10/09/2011 UPSSTATS.HTML(5)

    
    
  • MORE RESOURCE


  • Linux

    The Distributions





    Linux

    The Software





    Linux

    The News



  • MARKETING






  • Toll Free

webmaster@linuxguruz.com
Copyright © 1999 - 2016 by LinuxGuruz