LinuxGuruz
  • Last 5 Forum Topics
    Replies
    Views
    Last post


The Web Only This Site
  • BOOKMARK

  • ADD TO FAVORITES

  • REFERENCES


  • MARC

    Mailing list ARChives
    - Search by -
     Subjects
     Authors
     Bodies





    FOLDOC

    Computing Dictionary




  • Text Link Ads






  • LINUX man pages
  • Linux Man Page Viewer


    The following form allows you to view linux man pages.

    Command:

    tripplite_usb

    
    
    

    SYNOPSIS

           tripplite_usb -h
    
           tripplite_usb -a UPS_NAME [OPTIONS]
    
    
    

    SUPPORTED HARDWARE

           This driver should work with older Tripp Lite UPSes which are detected
           as USB HID-class devices, but are not true HID Power-Device Class
           devices. So far, the devices supported by tripplite_usb have product ID
           0001, and the newer units (such as those with "LCD" in the model name)
           with product ID 2001 require the usbhid-ups(8) driver instead. Please
           report success or failure to the nut-upsuser mailing list. A key piece
           of information is the protocol number, returned in ups.debug.0. Also,
           be sure to turn on debugging (-DDD) for more informative log messages.
           If your Tripp Lite UPS uses a serial port, you may wish to investigate
           the tripplite(8) or tripplite_su(8) driver.
    
           This driver has been tested with the following models:
    
           ?   INTERNETOFFICE700
    
           ?   OMNIVS1000
    
           ?   OMNIVS1500XL (some warnings)
    
           ?   SMART700USB
    
           ?   SMART1500RM2U
    
           ?   SMART2200RMXL2U
    
           ?   SMART3000RM2U
    
           If you have used Tripp Lite's PowerAlert software to connect to your
           UPS, there is a good chance that tripplite_usb will work if it uses one
           of the following protocols:
    
           ?   Protocol 0004
    
           ?   Protocol 1001
    
           ?   Protocol 2001
    
           ?   Protocol 3003
    
           On the other hand, if the web page for your UPS on the Tripp-Lite
           website says "HID-compliant USB port also enables direct integration
           with built-in power management and auto-shutdown features of Windows
           and MAC OS X", then you should use the usbhid-ups(8) driver instead.
    
    
    

    EXTRA ARGUMENTS

           This driver supports the following optional settings in the ups.conf(5)
               down in the correct order.
    
               Note
               This regex is matched against the full USB product string as seen
               in lsusb(8). The ups.model in the upsc(1) output only lists the
               name after TRIPP LITE, so to match a SMART2200RMXL2U, you could use
               the regex .*SMART2200.*.
    
           productid
               The productid is a regular expression which matches the UPS PID as
               four hexadecimal digits. So far, the only devices that work with
               this driver have PID 0001.
    
           serial
               It does not appear that these particular Tripp Lite UPSes use the
               iSerial descriptor field to return a serial number. However, in
               case your unit does, you may specify it here.
    
           For more information on regular expressions, see regex(7)
    
    
    

    RUNTIME VARIABLES

           ups.delay.shutdown
               This variable is the same as the offdelay setting, but it can be
               changed at runtime by upsrw(8).
    
           ups.id
               Some SMARTPRO models feature an ID that can be set and retrieved.
               If your UPS supports this feature, this variable will be listed in
               the output of upsrw(8).
    
           outlet.1.switch
               Some Tripp Lite units have a switchable outlet (usually outlet #1)
               which can be turned on and off by writing 1 or 0, respectively, to
               outlet.1.switch with upsrw(8). If your unit has multiple switchable
               outlets, substitute the outlet number for 1 in the variable name.
               Be sure to test this first - there is no other way to be certain
               that the number used by the driver matches the label on the unit.
    
    
    

    KNOWN ISSUES AND BUGS

           The driver was not developed with any official documentation from Tripp
           Lite, so certain events may confuse the driver. If you observe any
           strange behavior, please re-run the driver with -DDD to increase the
           verbosity.
    
           So far, the Tripp Lite UPSes do not seem to have a serial number or
           other globally unique identifier accessible through USB. Thus, when
           monitoring several Tripp Lite USB UPSes, you should use either the bus
           or product configuration options to uniquely specify which UPS a given
           driver instance should control.
    
           For instance, you can easily monitor an OMNIVS1000 and a SMART1500RM2U
           at the same time, since they have different USB Product ID strings. If
    
           A Tripp Lite OMNIVS1000 was graciously donated to the NUT project by
           Bradley Feldman (http://www.bradleyloritheo.com)
    
    
    

    SEE ALSO

       The core driver:
           nutupsdrv(8)
    
       Other drivers for Tripp-Lite hardware:
           tripplite(8), tripplitesu(8), usbhid-ups(8)
    
       Other tools:
           regex(7), lsusb(8)
    
    
    

    INTERNET RESOURCES

           The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
    
    
    

    Network UPS Tools 10/09/2011 TRIPPLITE_USB(8)

    
    
  • MORE RESOURCE


  • Linux

    The Distributions





    Linux

    The Software





    Linux

    The News



  • MARKETING






  • Toll Free

webmaster@linuxguruz.com
Copyright © 1999 - 2016 by LinuxGuruz