LinuxGuruz
  • Last 5 Forum Topics
    Replies
    Views
    Last post


The Web Only This Site
  • BOOKMARK

  • ADD TO FAVORITES

  • REFERENCES


  • MARC

    Mailing list ARChives
    - Search by -
     Subjects
     Authors
     Bodies





    FOLDOC

    Computing Dictionary




  • Text Link Ads






  • LINUX man pages
  • Linux Man Page Viewer


    The following form allows you to view linux man pages.

    Command:

    snmp-ups

    
    
    

    NOTE

           This man page only documents the hardware-specific features of the
           snmp-ups driver. For information about the core driver, see
           nutupsdrv(8).
    
    
    

    SUPPORTED HARDWARE

           The snmp-ups driver automatically detects and supports a wide range of
           devices by loading various MIBS: ietf:: UPS that is RFC 1628 (UPS MIB)
           compliant, e.g. MGE UPS SYSTEMS, Liebert, perhaps others (default)
    
           mge
               MGE UPS SYSTEMS and MGE Office Protection Systems devices with SNMP
               cards (ref 66062, 66045, 66074 and 66244)
    
           apcc
               APC AP9606 APC Web/SNMP management card, perhaps others
    
           netvision
               Socomec Sicon UPS with Netvision Web/SNMP management card/external
               box
    
           pw
               Powerware devices with ConnectUPS SNMP cards
    
           aphel_genesisII
               Eaton Powerware ePDU Monitored
    
           aphel_revelation
               Eaton Powerware ePDU Managed
    
           raritan
               Various Raritan PDUs
    
           baytech
               Various BayTech PDUs
    
           cpqpower
               HP/Compaq AF401A management card, perhaps others
    
           cyberpower
               Cyberpower RMCARD201. Should also support RMCARD100 (net version),
               RMCARD202 and RMCARD301
    
    
    

    EXTRA ARGUMENTS

           This driver supports the following optional settings in the
           ups.conf(5):
    
           mibs=name
               Set MIB compliance (default=auto, allowed entries: refer to the
               above SUPPORTED HARDWARE). With "auto", the driver will try a
               select set of SNMP objects until it finds one that the device
               responds to.
               the hardware. This will remove input.transfer.low and
               input.transfer.high from the list of variables. This should only be
               used on APCC Symmetra equipment which has strangeness in the
               three-phase power reporting.
    
           secLevel=value
               Set the securityLevel used for SNMPv3 messages
               (default=noAuthNoPriv, allowed: authNoPriv,authPriv)
    
           secName=value
               Set the securityName used for authenticated SNMPv3 messages (no
               default)
    
           authPassword=value
               Set the authentication pass phrase used for authenticated SNMPv3
               messages (no default)
    
           privPassword=value
               Set the privacy pass phrase used for encrypted SNMPv3 messages (no
               default)
    
           authProtocol=value
               Set the authentication protocol (MD5 or SHA) used for authenticated
               SNMPv3 messages (default=MD5)
    
           privProtocol=value
               Set the privacy protocol (DES or AES) used for encrypted SNMPv3
               messages (default=DES)
    
    
    

    REQUIREMENTS

           You will need to install the Net-SNMP package from
           http://www.net-snmp.org/ before building this driver.
    
           SNMP v3 also requires OpenSSL support from http://www.openssl.org.
    
    
    

    LIMITATION

       Shutdown
           This driver does not provide a proper upsdrv_shutdown() function. There
           probably never will be one, since at the time this script should run
           (near the end of the system halt script), there will be no network
           capabilities anymore. Probably the only way to shutdown an SNMP UPS is
           by sending it a shutdown with delay command through upscmd(8) and hope
           for the best that the system will have finished shutting down before
           the power is cut.
    
    
    

    INSTALLATION

           This driver is only built if the Net-SNMP development files are present
           on the system. You can also force it to be built by using "configure
           --with-snmp=yes" before calling make.
    
    
    

    IMPLEMENTATION

           The hostname of the UPS is specified with the "port" value in ups.conf,
                       mibs = mge
                       secLevel = authPriv
                       secName = mysecurityname
                       authPassword = myauthenticationpassphrase
                       privPassword = myprivatepassphrase
                       desc = "Example SNMP v3 device, with the highest security level"
    
    
    

    AUTHORS

           Arnaud Quette, Dmitry Frolov
    
           Sponsored by Eaton http://www.eaton.com and originally by MGE UPS
           SYSTEMS http://www.mgeups.com/
    
    
    

    SEE ALSO

       The core driver:
           nutupsdrv(8)
    
       NUT SNMP Protocols Library
           Available at: http://www.networkupstools.org/protocols/snmp/
    
       Internet resources:
           The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
    
    
    

    Network UPS Tools 12/05/2011 SNMP-UPS(8)

    
    
  • MORE RESOURCE


  • Linux

    The Distributions





    Linux

    The Software





    Linux

    The News



  • MARKETING






  • Toll Free

webmaster@linuxguruz.com
Copyright © 1999 - 2016 by LinuxGuruz