Linux Man Page Viewer
The following form allows you to view linux man pages.
slattach [-dehlLmnqv] [-c command] [-p proto] [-s speed] [tty]
Slattach is a tiny little program that can be used to put a normal ter-
minal ("serial") line into one of several "network" modes, thus allow-
ing you to use it for point-to-point links to other computers.
Execute command when the line is hung up. This can be used to
run scripts or re-establish connections when a link goes down.
[-d] Enable debugging output. Useful when determining why a given
setup doesn't work.
[-h] Exit when the carrier is lost. This works on both /dev/tty and
/dev/cua devices by directly monitoring the carrier status every
15 seconds. [-v] Enable verbose output. Useful in shell
[-q] Operate in quiet mode - no messages at all.
[-l] Create an UUCP-style lockfile for the device in /var/lock.
[-n] Equivalent to the "mesg n" command.
[-m] Do not initialize the line into 8 bits raw mode.
[-e] Exit right after initializing device, instead of waiting for the
line to hangup.
[-L] Enable 3 wire operation. The terminal is moved into CLOCAL mode,
carrier watching is disabled.
Set a specific kind of protocol to use on the line. The default
is set to cslip , i.e. compressed SLIP. Other possible values
are slip (normal SLIP), adaptive (adaptive CSLIP/SLIP), ppp
(Point-to-Point Protocol) and kiss (a protocol used for communi-
cating with AX.25 packet radio terminal node controllers). The
special argument tty can be used to put the device back into
normal serial operation. Using 'ppp' mode is not normally use-
ful as ppp requires an additional ppp daemon pppd to be active
on the line. For kiss connections the axattach program should be
Set a specific line speed, other than the default.
If no arguments are given, the current terminal line (usually: the
login device) is used. Otherwise, an attempt is made to claim the
Miquel van Smoorenburg, <firstname.lastname@example.org>
George Shearer, <email@example.com>
Yossi Gottlieb, <firstname.lastname@example.org>
12 Feb 1994 SLATTACH(8)