LinuxGuruz
  • Last 5 Forum Topics
    Replies
    Views
    Last post


The Web Only This Site
  • BOOKMARK

  • ADD TO FAVORITES

  • REFERENCES


  • MARC

    Mailing list ARChives
    - Search by -
     Subjects
     Authors
     Bodies





    FOLDOC

    Computing Dictionary




  • Text Link Ads






  • LINUX man pages
  • Linux Man Page Viewer


    The following form allows you to view linux man pages.

    Command:

    powercom

    
    
    

    NOTE

           This man page only documents the hardware-specific features of the
           powercom driver. For information about the core driver, see
           nutupsdrv(8).
    
    
    

    SUPPORTED HARDWARE

           This driver supports many similar kinds of UPS hardware. The most
           common ones are the Trust 425/625, Powercom, and Advice Partner/King
           PR750. Others using the same protocol may also work.
    
    
    

    EXTRA ARGUMENTS

           This driver supports the following optional settings in the ups.conf(5)
           file:
    
           linevoltage=value
               An integer specifying the line voltage. It can't be auto detected.
               Acceptable values are in the range of 110-120 or 220-240. The
               default is 230.
    
           manufacturer=name
               Specify the manufacturer name, which also can't be auto detected.
               This is a user defined string, so any name is acceptable. The
               default is PowerCom.
    
           modelname=name
               Specify the model name, which also can't be auto detected. This is
               a user defined string, so any name is acceptable. The default is
               Unknown.
    
           serialnumber=value
               Like modelname above, but for the serial number. The default is
               Unknown.
    
           type=name
               The exact type of the communication protocol within the powercom
               family, that will be used to communicate with the UPS. The type is
               named after the first modelname that was coded with that protocol.
               The acceptable names are Trust, Egys, KP625AP, IMP, KIN, BNT, and
               BNT-other. The default is Trust.
    
               BNT-other is a special type for other BNT models (such as the 1500A
               at 120V and can be used to override ALL models using ALL of the
               following values.
    
           shutdownArguments={{minutes,seconds},whether_minutes_should_be_used}
               The minutes and seconds that the UPS should wait between receiving
               the shutdown command and actually shutting off. The other argument
               should be set to the character n only when the minutes value should
               be skipped and not sent to the UPS. The default is type-dependent
               and is given below. The braces and commas are mandatory. Note that
               there should be no whitespace characters.
    
               default is type-dependent and is given below. The braces and commas
               are mandatory, as the lack of white space characters.
    
           frequency={A,B}
               (Only for types KP625AP, Trust, Egys.) A pair to convert the raw
               frequency data to a human-readable frequency reading using the
               function 1/(A*x+B). If the raw value x IS the frequency, then set
               A=1/(x^2) and B=0. The default is type-dependent and is given
               below. Do note that the braces and commas are mandatory as well, as
               the lack of whitespace characters.
    
           loadPercentage={BatteryA,BatteryB,LineA,LineB}
               (Only for types KP625AP, Trust, Egys.) A quad to convert the raw
               load data to human readable load percentage reading using the
               function A*x+B. If the raw value x IS the Load Percent, then set
               A=1 and B=0. The default is type-dependent and is given below. Do
               note that the braces and commas are mandatory, as the lack of white
               space characters.
    
           batteryPercentage={Battery1,Battery2,Battery3,Line4,Line5}
               (Only for KP625AP, Trust, Egys.) A 5 tuple to convert the raw
               battery and line data to a human-readable battery and line
               percentage reading using the functions (Battery) A*x+B*y+C and
               (Line) D*x+E. If the raw value x IS the Battery Percent, then set
               A=1, B=0, C=0, D=1, E=0. The default is type-dependent and is given
               below. Do note that the braces and commas are mandatory, as the
               lack of white space characters.
    
           voltage={240A,240B,120A,120B}
               (Only for types KP625AP, Trust, Egys.) A quad that is used convert
               the raw voltage data to a human-readable voltage reading using the
               function A*x+B. If the raw value x IS HALF the Voltage, then set
               A=2, B=0. The default is type-dependent and is given below. Do note
               that the braces and commas are mandatory, as well as the lack of
               whitespace characters.
    
    
    

    DEFAULT VALUES FOR THE EXTRA ARGUMENTS

               linevoltage = 230
               manufacturer = PowerCom
               modelname = Unknown
               serialnumber = Unknown
               type = Trust
    
           The rest of the default values for the extra arguments are
           type-dependent. However, BNT-other is a special type that can be used
           to override ALL values for ALL models.
    
       Trust
               numOfBytesFromUPS = 11
               methodOfFlowControl = dtr0rts1
               validationSequence = {{5,0},{7,0},{8,0}}
               shutdownArguments = {{0,10},n}
    
       Egys
               numOfBytesFromUPS = 16
               methodOfFlowControl = no_flow_control
               validationSequence = {{5,0x80},{7,0},{8,0}}
               shutdownArguments = {{0,10},n}
               frequency = {0.00020997,0.00020928}
               loadPercentage = {6.1343,-0.3808,1.3333,0.6667}
               batteryPercentage = {5.0000,0.3268,-825.00,2.2105,-355.37}
               voltage = {1.9216,-0.0977,0.9545,0.0000}
    
       IMP
               numOfBytesFromUPS = 16
               methodOfFlowControl = no_flow_control
               validationSequence = {{5,0xFF},{7,0},{8,0}}
               shutdownArguments = {{1,30},y}
    
       KIN
               numOfBytesFromUPS = 16
               methodOfFlowControl = no_flow_control
               validationSequence = {{11,0x4b},{8,0},{8,0}}
               shutdownArguments = {{1,30},y}
    
       BNT
               numOfBytesFromUPS = 16
               methodOfFlowControl = no_flow_control
               validationSequence = {{11,0x42},{8,0},{8,0}}
               shutdownArguments = {{1,30},y}
    
       BNT-other
               numOfBytesFromUPS = 16
               methodOfFlowControl = no_flow_control
               validationSequence = {{8,0},{8,0},{8,0}}
               shutdownArguments = {{1,30},y}
               frequency = {0.00027778,0.0000}
               loadPercentage = {1.0000,0.0,1.0000,0.0}
               batteryPercentage = {1.0000,0.0000,0.0000,1.0000,0.0000}
               voltage = {2.0000,0.0000,2.0000,0.0000}
    
    
    

    AUTHOR

           Peter Bieringer <pb@bieringer.de>, Alexey Sidorov
           <alexsid@altlinux.org>, Keven L. Ates <atescomp@gmail.com>
    
    
    

    SEE ALSO

       The core driver:
           nutupsdrv(8)
    
       Internet resources:
           The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
    
    
  • MORE RESOURCE


  • Linux

    The Distributions





    Linux

    The Software





    Linux

    The News



  • MARKETING






  • Toll Free

webmaster@linuxguruz.com
Copyright © 1999 - 2016 by LinuxGuruz