LinuxGuruz
  • Last 5 Forum Topics
    Replies
    Views
    Last post


The Web Only This Site
  • BOOKMARK

  • ADD TO FAVORITES

  • REFERENCES


  • MARC

    Mailing list ARChives
    - Search by -
     Subjects
     Authors
     Bodies





    FOLDOC

    Computing Dictionary




  • Text Link Ads






  • LINUX man pages
  • Linux Man Page Viewer


    The following form allows you to view linux man pages.

    Command:

    bcmxcp_usb

    
    
    
    

    NOTE

           This man page only documents the hardware-specific features of the
           bcmxcp_usb driver. For information about the core driver, see
           nutupsdrv(8). This driver is a variant of the serial driver bcmxcp and
           uses the same core code.
    
    
    

    SUPPORTED HARDWARE

           This driver should recognize all BCM/XCP-compatible UPSes that are
           connected via USB. It has been developed and tested on Powerware PW3501
           hardware. It also has been tested on PW5110 hardware.
    
    
    

    EXTRA ARGUMENTS

           This driver supports the following optional settings in the
           ups.conf(5).
    
           shutdown_delay=delay
               The number of seconds that the UPS should wait between receiving
               the shutdown command and actually shutting off.
    
    
    

    DEFAULT VALUES FOR THE EXTRA ARGUMENTS

           shutdown_delay =120
    
    
    

    INSTANT COMMANDS

           This driver supports the following Instant Commands:
    
           shutdown.return
               Turn off the load and return when power is back.
    
           shutdown.stayoff
               Turn off the load and remain off.
    
           test.battery.start
               Start a battery test.
    
    
    

    TODO LIST

           Report UPS alarm status
               BCM/XCP supports reporting a wide range of UPS alarm conditions.
    
           Report UPS statistics informations
               BCM/XCP supports reporting of UPS statistics data.
    
    
    

    EXPERIMENTAL DRIVER

           This driver has been tagged experimental, even if it has been reported
           to be stable. Thus it is not suitable for production systems and it is
           not built by default. This is mainly due to the fact that it is a new
           driver.
    
    
    

    INSTALLATION

           This driver is not built by default. You can build it by using
           "configure --with-usb=yes". Note that it will also install other USB
           drivers.
    
    
    

    KNOWN ISSUES AND BUGS

        Got EPERM: Operation not permitted upon driver startup""
           You have forgotten to install the hotplug files, as explained in the
           INSTALLATION section above. Don't forget to restart hotplug so that it
           applies these changes.
    
    
    

    AUTHOR

           Tore ?rpetveit <tore@orpetveit.net>, Wolfgang Ocker <weo@weo1.de>
    
    
    

    SEE ALSO

       The core driver:
           nutupsdrv(8)
    
       Internet resources:
           The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
    
    
    

    Network UPS Tools 10/09/2011 BCMXCP_USB(8)

    
    
  • MORE RESOURCE


  • Linux

    The Distributions





    Linux

    The Software





    Linux

    The News



  • MARKETING






  • Toll Free

webmaster@linuxguruz.com
Copyright © 1999 - 2016 by LinuxGuruz